|
Product Description
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2V.Like our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.
The PowerBoost 1000 has at the heart a TPS61030 boost converter from TI. This boost converter chip has some really nice extras such as low battery detection, 4A internal switch, synchronous conversion, excellent efficiency, and 700KHz high-frequency operation. Check out these specs!
Great for powering your robot, Arduino project, single-board-computer such as Raspberry Pi or BeagleBone! Each order comes with one fully assembled and tested PCB, a loose 2-PH JST jack, a 2-pin Terminal block and a loose USB A jack.
If you are powering your project from USB, solder the USB A jack in (a 3-minute soldering task). Then choose either JST for input (JST is often used for our LiIon batteries, but the connector is only rated for 2A) or a terminal block.
The 1000 version comes with a 2-pin terminal block so you can solder it to the output spot where the USB jack would go. Or don't solder any connectors in for a more compact power pack and go with 22AWG wires soldered directly in.
Features
- Dimensions: 29mm x 23mm x 2mm / 1.1" x .9" x .1"
- Height: w/ JST: 7.5mm / .30"
- DC/DC boost converter
- Run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects
Customers Who Bought This Item Also Bought
- Adafruit PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
- Adafruit 328 Battery, Lithium Ion Polymer, 3.7V, 2500mAh, 2" x 2.55" x 0.30" Size
- Adafruit USB/DC/Solar Lithium Ion/Polymer Charger [ADA390]
- Adafruit Lithium Ion Battery Pack - 3.7V 6600mAh
- Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 [ADA1904]
- Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)
- Adafruit PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+ [ADA1903]
- Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
- PowerBoost Charger, Rechargeable 5V Lipo USB Boost at 500mA+
- Shappy 20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector
*If this is not the "Adafruit (PID 2030 PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+" product you were looking for, you can check the other results by clicking this link. Details were last updated on Jan 11, 2025 14:44 +08.