innomaker USB to CAN Converter Module for Raspberry Pi Zero(W)/Pi3B+/PI4/Beaglebone/Tinker Board and

Product Description

Innomaker USB-CAN analyzer converter module is a "plug and play " and bi-directional port powered USB to CAN converter which realizes long-distance communication between your Raspberry Pi and other devices stably though CAN- Bus connection. Compatible with Raspberry Pi Zero/Zero W/2B/3B/3B+.
With small size and convenient operation, It's a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist.

Technical Specification:
CAN: D-SUB, 9 pins
USB: USB 2.0 Full-Speed, Micro USB
Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN
Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily
Isolation Voltage: 1.5K VDC/min, 3K VDC/1s
Microcontroller: STM32F0, 48MHz
Termination: 120 Ohm resistor selectable jumper
CAN Transceiver: ISO1050DUBR ,Texas Instruments
Work Temperature: -40°~ 85°
Relative humidity: 15-90%, not condensing
PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm
Weight: 15.5 g

Packing List:
1 x USB to CAN Converter 1 x Terminal Block 1 x USB Cable

Features

• The USB to CAN Converter Module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.
• The USB CAN Module support Windows System, Mac OS, Linux, Raspbian(v5.4 kernel), Ubuntu, Android and Venus OS.
• Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification.
• Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature.
• Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur).

Customers Who Bought This Item Also Bought

*If this is not the "innomaker USB to CAN Converter Module for Raspberry Pi Zero(W)/Pi3B+/PI4/Beaglebone/Tinker Board and" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Nov 11, 2024 07:07 +08.