|
|
Product Description
Description:GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO-6M.
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
Features:
GT-U7 module, with high sensitivity, low power consumption.
Miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
In the ordinary GPS receiver module can not locate the place, such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning.
Module with high sensitivity, small static drift, low power and lightweight volume.
Specification:
With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
Operating voltage: 3.6V-5V (or direct usb power supply)
Operating baud rate: 9600 (can be modified)
Onboard rechargeable button battery
Onboard E2PROM can save parameter data
NEMA output format is compatible with NEO-6M
Size: 27.6mm * 26.6mm can be inserted or selected patch (with positioning holes)
Application areas:
Vehicle-mounted
Handheld devices such as PDAs
Vehicle monitoring
Mobile phones, camcorders and other mobile positioning systems
Sharing bike
Sharing mobile power
Package Including:
1 * GT-U7 GPS Module
1 * IPX antenna
Features
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
Customers Who Bought This Item Also Bought
- HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino
- JBtek BMP180 Barometric Pressure, Temperature and Altitude Sensor
- HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5
- Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [ADA746]
- DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft
- HiLetgo 5pcs DS3231 AT24C32 Clock Module Real Time Clock Module IIC RTC Module for Arduino Without Battery
- Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
- HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250
- HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
- MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit
*If this is not the "GPS Module GPS NEO-6M(Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcont" product you were looking for, you can check the other results by clicking this link
.
Details were last updated on Dec 15, 2025 16:03 +08.
