|
|
Product Description
The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor's nRF52840 - a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your project, you'll be presented with a seemingly endless list of project-possibilities in an incredibly small package.Our mini development board for the nRF52840 breaks out most of the critical I/O pins including GPIO and those needed for power while maintaining a small footprint that nearly matches that of the Arduino Pro Mini (except those covered by the Qwiic Connector). It features a USB interface (using the nRF52840's native USB support), which can be used to program, power, and communicate with the chip making it able to be used for any purpose (UART, I2C, SPI) that those of the Arduino Pro Mini could. The Pro nRF52840 Mini features a Raytac MDBT50Q-P1M module. This module connects the nRF52840 to a trace antenna, fits the IC into an FCC-approved footprint, and also includes a lot of the decoupling and timing mechanisms that would otherwise be required for a bare nRF52840 design. Also included onboard is a LiPo battery charger, a Qwiic connector, an on/off switch, a reset switch, and a user LED/button.
The board comes pre-programmed with a USB bootloader. You can develop programs for the nRF52840's Cortex-M4 using either Arduino, Circuit Python, or C (using Nordic's nRF5 SDK), and load that compiled code using a USB serial or mass-storage interface.
Features
- ARM Cortex-M4 CPU with floating point unit (FPU). IMB Internal Flash. 256kB internal RAM
- Integrated 2.4GHz radio with support for: BLE, Bluetooth 5, ANT, Nordic's proprietary RF protocol.
- Every I/O peripheral you could need. USB, UART, I2C, SPI, Analog-to-digital converters (ADC), PWM, RTC
- Peripheral-multiplexing -- (Nearly) any pin can support any of the above features.
- You can develop programs for the nRF52840's Cortex-M4 using either Arduino, Circuit Python, or C (using Nordic's nRF5 SDK).
Customers Who Bought This Item Also Bought
- SparkFun Qwiic Cable Kit Hook Up I2C Qwiic development boards in no time No soldering required Includes 10 cables Different Lengths Styles Breadboardable Polarized 4-pin JST connector Daisy Chain-able
- Segger J-Link EDU mini - JTAG/SWD Debugger
- Adafruit SWD (2x5 1.27mm) Cable Breakout Board [ADA2743]
- Adafruit Feather nRF52 Bluefruit LE - nRF52832
- GeeekPi nRF52840 Micro Dev Kit USB Dongle
- Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino
- PARTICLE Xenon Endpoint and Repeater Development Board for IoT Projects and Prototyping
- EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables
- PARTICLE Argon Wi-Fi Connectivity Development Kit for IoT Projects and Prototyping
- MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit
*If this is not the "SparkFun Pro nRF52840 Mini - Bluetooth Development Board Includes LiPo battery charger Qwiic connect" product you were looking for, you can check the other results by clicking this link
.
Details were last updated on Oct 7, 2024 19:18 +08.
