West System 105A Epoxy Resin (1 qt) with 206A Slow Epoxy Hardener (.43 pt) + Mini Epoxy Metering Pum

Product Description

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.

105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72 F (22C).

105 Epoxy Resin is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a WEST SYSTEM Epoxy hardener. An excellent adhesive, 105 epoxy mixtures will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing." 105 Epoxy Resin/207 Special Clear Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

Formulated without volatile solvents, 105 Epoxy Resin does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins.

Pair 105 Epoxy with corresponding letter size of 205 Fast Hardener, 206 Slow Hardener, 209 Extra Slow Hardener or 207 Special Clear Hardener.

Bundle Includes:

• West System 105A - Epoxy Resin (1 qt)
• West System 206A - Slow Epoxy Hardener (.43 pt)
• West System 300 - Mini Pumps Epoxy Metering Pump Set

Features

• CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-A Resin (32 fl oz), WEST SYSTEM 206-A Slow Hardener (7 fl oz), and one set of calibrated 300 Mini Pumps. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures.
• v105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 206 Slow Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (206 Slow Hardener is not intended for clear coating.)
• POT LIFE AT 72°F (22°C) is 20 to 25 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
• EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
• INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 206 Slow Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.

Customers Who Bought This Item Also Bought

*If this is not the "West System 105A Epoxy Resin (1 qt) with 206A Slow Epoxy Hardener (.43 pt) + Mini Epoxy Metering Pum" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Nov 26, 2024 07:30 +08.