Lensmate Quick Change Filter Adapter Kit 52mm for Sony RX100 VII or RX100 VI

Product Description

Now you can add filters to your Sony RX100 VII or RX100 VI with no vignetting through out the entire focal range. Only the tiny receiver stays on the camera (it adds only 3mm to the depth of the camera). The filter/filter holder assembly bayonets onto the receiver for quick changes without having to thread the filter on and off. The filter holder is retained by a low tension locking system, so very little torque is applied to the lens barrel when attaching and detaching it. There is no chance of flash blockage at any focal length (with the filter holder removed), since the receiver is the same diameter as the end of the lens barrel. The receiver adds only 3mm (about 1/8") to the total depth of the RX100 VA camera. It attaches to the camera using a 3M dual-sided adhesive film which holds tenaciously yet is easy to remove cleanly and safely when desired. We designed the system so that the filter remains in the filter holder and is attached/detached as an assembly. The filter holder bayonets onto camera with less than 90° of rotation to the locked position. The low tension locking system assures that the lens barrel won't be harmed by over-enthusiastic tightening (or loosening) of the filter. The ability to quick-change the filter in changing light conditions without having to thread/unthread should appeal to filter users. You may use 2 filters at a time, if one is a low profile polarizer.

Features

• Now you can add any standard 52mm filter to your RX100 VII or RX100 VI with no vignetting through out the entire focal range.
• The Lensmate RX100 VII or RX100 VI Quick Change Filter Adapter Kit 52mm includes Part 1 the tiny receiver, Part 2 the actual 52mm filter adapter, Installation Tool, safe removal tool, 52mm clip in style lens cap, and a handled lid container for the filter/filter holder/lens cap assembly for convenient storage. Camera and filter not included.
• Only the tiny receiver stays on the camera (it adds only 3mm to the depth of the camera). The filter/filter holder assembly bayonets onto the receiver for quick changes without having to thread the filter on and off.
• The tiny receiver attaches to end of the cameras zoom lens using a custom 3M dual-sided adhesive film which holds tenaciously yet is easy to remove cleanly and safely when desired. The quick change kit packaging includes a URL to the Install Movie and removal instructions.
• There is no vignetting at any focal length with a single 52mm filter, and you may stack a UV and an ND, or 2 ND's, or a Low profile Polarizer with no vignetting.

Customers Who Bought This Item Also Bought

*If this is not the "Lensmate Quick Change Filter Adapter Kit 52mm for Sony RX100 VII or RX100 VI" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jan 11, 2025 04:13 +08.