|
|
Product Description
Anmbest 10pcs 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buck Module 800mAFeatures:
Output current: 1A
Line adjustment rate: 0.2% (maximum)
Load regulation: 0.4% (max.)
Package Type: SOT-223
Operating junction temperature range: -40 to 125°C
Welding temperature (25 seconds): 265°C
Storage temperature: - 65~150°C
Output voltage: 3.267 to 3.333V (IOUT: 0 to 1A, VIN :4.75V to 12V)
Line adjustment (maximum): 10mV (VIN :4.75V to 12V)
Load regulation (maximum): 15mV (VIN = 5V, IOUT: 0 to 1A)
Voltage difference (maximum): 1.3V
Current limit: 900 ~ 1500mA
Quiescent Current (Max): 10mA
Ripple suppression (minimum): 60dB
Size:8.6mm x 12.33mm
Note:
1.Please do not exceed operating voltage, or it will be damaged easily!
2.Exceeding the maximum allowable power consumption will result in excessive chip temperature
3.Can not reverse polarity , or it will result in short circuit!
Package included:
10 x AMS1117-3.3 module
Features
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection. AMS1117-3.3 pinout can be easy to connected with your MCU development and provide the contant power supply.
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection.
Customers Who Bought This Item Also Bought
- 4Pcs ESP8266 Serial WiFi Module ESP-01 Updated Wireless Transceiver Board 3.3V for Arduino
- ESP-01S USB to ESP8266 ESP-01S Wireless Wifi Adapter Module Wi-Fi CH340G 4.5-5.5V, 115200 Baud Rate
- Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
- MakerFocus 5pcs NRF24L01+ Adapter ESP8266 ESP-01 Adapter Module for NRF24L01+ 2.4GHZ Wireless Transceiver Module and ESP8266 ESP-01 WiFi Module
- DIYmall ESP8266 ESP-01 Breakout Board ESP-01S Breadboard Adapter PCB Board for Serial WiFi Transceiver Network Module(Pack of 5pcs)
- MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE
- Makerfocus 4pcs ESP8266 ESP-01S WiFi Serial Transceiver Module with 1MB Flash for Arduino
- HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython (Pack of 3PCS)
- MakerFocus 4pcs ESP8266 ESP-01 Serial Wireless WiFi Transceiver Receiver Module 1MB SPI Flash DC3.0-3.6V Internet of Things WiFi Module Board Compatible with Arduino
- MagiDeal 10pcs Female Micro USB to DIP 5-Pin Pinboard 2.54mm Micro USB Type
*If this is not the "Anmbest 10 Pack 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buc" product you were looking for, you can check the other results by clicking this link
.
Details were last updated on May 5, 2025 17:28 +08.
