Abn L5-30R Connector with RV Power Cord Cover & Ring - 30 Amp Twist Lock Inlet Locking Plug Protecto

Product Description

Replace the end on your existing power cord with the ABN 30 Amp Locking Connector with Boot and Ring. It keeps a weatherproof seal for your RV, marine watercraft, and other outdoor applications. The female connector and cover ring are designed for use with round jacketed, hard usage cable (S-type, 8-3 AWG). Remove the housing by loosening the 3 screws on the face of the device, slide the included weather-resistant boot over the cable, and slide the housing over the cable. Strip the outer jacket of the cord and each individual conductor. Insert all the wires into the proper color-coded terminal pockets. Tighten the terminal screws and strain relief screws. Slide the housing over the connector body, tighten the assembly screws, and slide weather-resistant boot over the complete assembly. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

• KEEP CORDS SAFE: The ABN 30 Amp Locking Connector with Cover Boot and Ring is designed to secure and protect your cord connector and keep a weatherproof seal for your RV, camper, trailer, marine watercraft, and other outdoor applications; For regulating and waterproofing purposes
• USE YOUR CONNECTOR: Quickly locks the cord set in the inlet; Side grips for an easy and secure connection; Designed for use with round jacketed, hard usage cable (S-type), 8-3AWG; As long as you have a female cord connector with the same 30A 125VAC configuration, this connector will fit your application
• PERFECT SIZE: 7.5-inch (19.1cm) assembly overall length; Cover and ring – 1.75-inch (4.4cm) inner diameter (ID); 3-inch (7.6cm) outer diameter (OD); 3-inch (7.6cm) inside depth; 5-inch (12.7cm) outer length; Connector – Approximate measurement across the face is 1.75 inches (4.4cm); Across the back where the cord enters adds 0.25 inch (2 inches / 5.1cm across); Total length is 3.9 inches (9.9cm)
• BUILT TO LAST: Cover constructed with a bright yellow rubber body and black heavy-duty plastic ring for extra longevity with no leaks; 30 Amp 125 Volt rating; Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or insects can enter and wreak havoc
• EASY TO USE: Instructions included; Remove housing by loosening face screws, slide weather-resistant boot over cable, and slide housing over cable; Strip cord outer jacket and each individual conductor to expose the copper wire; Insert all wires into proper color-coded terminal pockets; Tighten terminal screws and strain relief screws; Slide housing over connector body, tighten assembly screws, and slide weather-resistant boot over complete assembly

Customers Who Bought This Item Also Bought

*If this is not the "Abn L5-30R Connector with RV Power Cord Cover & Ring - 30 Amp Twist Lock Inlet Locking Plug Protecto" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Nov 2, 2024 18:33 +08.