ZXMOTO 13Ft Headlight Sealant Retrofit Refit Butyl Rubber Glue Reseal for Car Headlamps Window Door

Product Description

♥Features:
▶ Maretial:Synthetic Butyl Rubber
▶ Color:Balck
▶ Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.)
▶ Thickness: Approx. 9mm 0.35''

♥Easy Installation:
▶ First: Clean the edge of the car door/windshield/headlamp cover with neutral detergent and wait until dry.
▶ Second: Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.

※Please Note:
When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.

♥Package Include:
1x 13ft. Black Butyl Rubber Headlight Sealant

Features

• 🚗 Rubber Sealant is use for the side of car doors column A/B,it can effectively keeps out the wind, prevents the water leakage and lower the noise outside the car.
• 🚗 Recommended for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen.It will remain permanently sealing and waterproofing.
• 🚗 Maretial:Synthetic Butyl Rubber.Waterproof.
• 🚗 Length: Approx. 4m (13ft). (enough for re-sealing about two - four headlight assemblies.)
• 🚗 Color:Balck

Customers Who Bought This Item Also Bought

*If this is not the "ZXMOTO 13Ft Headlight Sealant Retrofit Refit Butyl Rubber Glue Reseal for Car Headlamps Window Door " product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jan 11, 2025 05:13 +08.