|
Product Description
Name: UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED moduleThis OLED display module is small, only 0.96" diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project.
Features:
OLED self-luminous, no backlight
Size: 0.96"
Driver IC: SSD1306
Voltage: 3.3V-5V DC
Viewing angle: > 160°
High resolution: 128 x 64
Working Temperature: -30°C~70°C
Display: 2 rows of yellow, 6 rows of blue
Module Size: 27mmx 27mm x 4mm
Screen material: glass, need good protection
I2C Interface:
GND: Ground
VCC: 3.3V~5V
SCL: I2C Serial Clock (UNO: A5; MEGA: 21)
SDA: I2C Serial Data (UNO: A4; MEGA: 20)
Applications:
MP3, MP4, watch
Head-mounted displays
Meters and other intelligent instruments
Design any pretty patterns for your beloved electronic devices!
Package including:
1pcs UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED Display Module
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the oled screen unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm±0.5 tall.
Customers Who Bought This Item Also Bought
- LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
- Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino
- ELEGOO UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket w/All Technical Data in CD for Arduino UNO R3
- ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant
- ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant
- SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino R3 Mega2560
- MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino
- kuman for Raspberry pi 4B/3 Arduino Basic Starter Kit with LCD Screen Module Breadboard,Resistors Rotary Potentiometer Compatible with pro Mini atmega Mega Robot K64
- HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
- SunFounder IIC I2C TWI 1602 Serial LCD Module Display for Arduino R3 Mega 2560 16x2
*If this is not the "UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Dis" product you were looking for, you can check the other results by clicking this link. Details were last updated on Nov 6, 2024 06:29 +08.