|
|
Product Description
From The ManufacturerThis misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place. Use of precision nozzle keypunch, sophisticated production, saving more than 10 times cost compared with the humidifier. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle. Nozzle can fully spray use the pressure of tap water.
★The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
★Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
★A Filter on your mist system is highly recommended.
★Plugged up Nozzles are not covered by any warranty.
WARNING
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Included In The Package:
32 x Brass Misting Nozzles
Features
- 320PCS Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:4-70kg/Cm (60-995 psi) Flow Rate:80-145l/Min (21-38GPM).
- Minimal Water Use Of 1/2 GPH Per Nozzle.
Customers Who Bought This Item Also Bought
- Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H
- Dreamtop 10pcs 1/4" Slip-Lok Misting Nozzle Tees with 1pc Plug for Cooling System 10/24 UNC
- Gimiton 6Pcs 1/4 Inch Hex Shank Drill Tap Bit Deburr Countersink Combination Drill and Tap Bit + 20pcs Brass Misting Nozzles 0.012”Orifice (0.3 mm) 10/24 UNC Misting Nozzles Replacement Heads
- 2 Pack (10 Total Couplings) Orbit 1/2 Inch PVC Coupling with Brass and Stainless Steel Mist Nozzle - 5 Pack
- BCP 10PCS 10/24 Screw Thread Brass Misting Nozzle Plug for Outdoor Cooling System
- Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce
- Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve
- Greenlee Drill/Tap/Countersink, Hss, 10-24
- mistcooling 3/4" Inlet and Outlet Size Misting System Calcium Inhibitor Filter, 6 Month Life
- Orbit 10109W Mist Calcium Inhibitor Filter
*If this is not the "Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012" Orifice (0.3 mm) 10/24 UNC" product you were looking for, you can check the other results by clicking this link
.
Details were last updated on Dec 3, 2024 00:41 +08.
