CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer RV Marine (Traile

Product Description

CZC AUTO 12V Submersible LED Trailer Light Kit
includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,license plate bracket and mounting hardware bag.UPDATE ON 9TH,JANE,2019.FOR BETTER SERVICE ON OUR CUSTOMER,WE IMPROVED THE WIREHARNESS TO 18GAUGE 100% COPPER WIRE FOR WATERPROOF USE
Waterproof and Submersible Feature and Testing：We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater
Each kit have assembly and opearating Instructions for easy installing.
Complies with DOT standards.
Side lens Light and Side marker lights are ALL LED
Super High visibility and Longer Lifetime LED advantage!
Right Tail Light have 16LEDS : 12 rear facing large LEDs and 4 SMD LED-on Side Marker .
Left Tail Light have 19LEDS : 12 rear facing large LEDs ,4 SMD LED-on Side Marker and 3 white LEDs facing down(For license Plate illumination)
Connect the BROWN wire to the towing vehicle's Tail light wire
Connect the YELLOW wire to the towing vehicle's Left Stop&Turn light
Connect the GREEN wire to the towing vehicle's Right Stop & Turn light
Attach the WHITE GROUND wire to the towing vehicle's frame

Frequently bought together:
Warning Tape B071DT18PC http://a.co/d9ZjUo4
Clearance ID Bar B07235MJ61 http://a.co/i0NtHTa

More Choice
Rectangular Trailer Light Kit B06ZZRL1BG http://a.co/4ouiOZk

New Arrival
Unique 6" oval trailer light X001OEUG01 http://a.co/c3JuTMO
Rooftop cargo carrier bag X001NDNI99 http://a.co/3Fnr89O
Hitch bag X001NDPJRN http://a.co/aOQdofi
Hitch tightener X001ODPF1R http://a.co/j70UCFR

Features

• Left and Right trailer tail Lights have 7 functions : stop/turn/tail/rear reflector/side reflector/side marker light/ license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat,utility trailer, truck, snowmobile, etc.
• 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime! The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval
• Excellent Waterproof/Submersible Lights for Boat Trailer. Sonic Welding Sealing Technology ensures sealing solidity of the tail lights. Every possible gap is sealed well with marine grade glue, such as wire's entrance holes and edge of the lens
• Easy to install the submersible trailer lights. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on instruction sheet
• CZC AUTO, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PLEASE NOTE: Any problem in using our submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS

Top Reviews

Update.
by Donald (5 out of 5 stars)
April 8, 2018

I drove my trailer 12 miles down the road and when I got to my destination I noticed something was missing.

It appears the right rear LED cover fell off in transit. Best I can tell it is held on with some sort of calking.

The lights look great and function fine, if only they would not fall apart...
---------------Update---------------

When the first set had issues, I ordered the same set from them thinking it was just a defect in the caulking. This assumption was correct because the replacement set has been working great for months without any issues.

Customer Service reached out to me after this review and sent me a set of lights to replace the faulty light which my first review describes.

Due to the replacement set working great and customer service shipping me a new set I am going to change my rating to 5 stars.
↭ 🍁 ↭
Solid Replacement Kit
by bassplayerforlord (5 out of 5 stars)
April 21, 2018

I use a 4x8 trailer to haul kayaks, a 4-wheeler, lawn tractor, lumber, and motorcycles. I don't submerge it when launching the kayaks, so I won't evaluate the water-worthiness of the lights. Today I rewired my trailer. The total time from start (readying the materials) to finish (putting things away) was 90 minutes at a steady, unrushed, pace.

After placing the trainer on it's side and removing the old lights, I used the old wiring to pull the new wiring harness through the frame-mounted (undercarriage) conduit. I then wire-brushed, filed, and sanded the metal surface where the ground leads to the tail lights would be attached to the frame. Each light was grounded to the frame using self-tapping screws. Dielectric grease was applied to the cleaned/sanded grounding surface to help promote electrical conductivity.

I agree that the crimp-on terminal for the ground (at the end of the tongue) was rather light-weight, but I used it. It works. I did trim away a small amount of insulation and crimped it directly to the bare wire instead of to the insulation, not depending on the crimps to puncture the insulation for contact. Since there's no stress placed on this connection, I felt safe using the provided terminal. Again - metal was cleaned, dielectric grease and self-tapping screws were used for that grounding connection.

I have an F150. The vehicle-mounted flat-4 connector is female. The included wiring harness connector didn't match it until I used a sharp knife to trim away that connection's "boot", thereby exposing three male connectors. The fourth connector (green wire) was carefully shaved, reducing the outside dimensions slightly, until it snugly fit inside the shaped receptacle mounted to the vehicle. Next, each of the three male connections was increased in diameter to facilitate a secure connection, by slightly spreading apart each pin with the blade of a pocket knife. A pre-existing slot in each connection made this an easy task. The lights were soldered to the harness, then wrapped in electrical tape and zip-tied out of the way to avoid snagging the wires. Plastic ribbed sheathing (from the old wiring) was applied to the new wiring harness where it emerges from the tongue and taped closed on each end to discourage ants and spiders from nesting inside.

Dielectric grease was applied to the male flat-4 connector pins on the trailer, and to the female flat-4 connection on the vehicle. The trailer was mounted to the hitch, wiring harness plugged in, and lights were tested. All lights functioned perfectly and were very bright - a huge improvement over the incandescent lights that were replaced!

If I decide to immerse the trailer for boat-launching, I'll waterproof the lenses and housing with silicone caulk. As a precaution, I'll unplug the harness from the vehicle. However, kayaks are easy to carry to the water's edge and launch without a trailer.

All said I'm very happy with my purchase and with the function of this replacement kit. The only thing left to do is put the trailer and lights to use and see how the lights hold up. If today's experience is any indication, I believe my optimism will hold.

Suggestion for updates: Replace the lightweight terminal ring with one that is more robust. Really want to sweeten your product? Include a small packet of electrical grease.
↭ 🍁 ↭
Good quality, bright lights.
by smholden94 (5 out of 5 stars)
November 16, 2017

I replaced a pair of incandescent taillights on my utility trailer with these LEDs units, and added the amber side marker LEDs to the front corners. I tested all of the lights with a 12V power source before installing, and they all worked correctly.

The included harness seems to be of good quality. It is a split or Y-harness; it has two brown wires so you will have a 'constant' 12V source down both sides of your trailer when the tow vehicle's lights are on.

The taillights each have a white ground wire, which I crimped a ring terminal on and installed on a bolt on the trailer frame. I haven't had any issues with flickering or apparent ground problems.

All functions work correctly, and are nice and bright. Very pleased.
↭ 🍁 ↭
Good Lights, Poor Directions, GREAT Customer Service
by BradJFitz (4 out of 5 stars)
October 26, 2018

This trailer light kit comes exactly as advertised. It was relatively easy to install and good quality for the price.

The directions could have been better. There's not much to installing this kit, but the side marker installation instructions were completely incorrect. They tell you to attach both wires from the side marker to the brown wire on the lighting harness. In reality, you only need to connect the brown wire from the marker to the brown wire on the harness and affix the white ground wire from the marker to the trailer itself. This took me almost 45 minutes of trial and error to figure out.

I will say that this seller had the best customer service of any Amazon vendor I have worked with. One of the side markers was broken out of the box. One of the wires wasn't soldered correctly to the board. They were quick to respond to my request, attentive and courteous addressing my concerns, and sent me a full replacement even though I only asked for one part. Would buy from again.
↭ 🍁 ↭
These lights are great for the quality
by Caleb S. (5 out of 5 stars)
November 21, 2017

These lights are great for the quality...I cant really speak to the wiring quality that other reviewers stated since I used my original harness. I did have an issue with the drivers side brake/turn lights not working when I first installed. I contacted the seller through Amazon and they quickly replied with an option to send me a completely new set even though I only needed the drivers side...the new one arrived about a week later direct from China and worked perfectly. Great overall customer service support and seems like it is a decent product. The housing was as sturdy as the Blazer brand incandescent version I replaced. LEDs are bright.
↭ 🍁 ↭
Good kit for a good price. Great customer service!
by Jared Bazan (5 out of 5 stars)
December 19, 2018

Nice light kit! Lights are bright and the wires seem to be thicker than the LED set that I bought at harbor freight a while back. I haven't submersed them yet but they look like they'll do fine. One of the light side markers had a crack in it so I contacted CZC direct and they sent me out a replacement ASAP. I received it a day earlier than they told me (next day after I gave them my address). Talk about quick customer service! I tested every light before installing with a 12v drill battery and they all worked great. Easy install and I would recommend. This was for a boat trailer so I didnt use the included wire nuts or the splice clips. I used heat shrink butt connectors and a little liquid electrical tape for extra precaution on all connections including over all the ground connections(after they were installed so to not interfere with connection). I had just repainted the trailer so I had to grind down all of my ground connections points. My only complaint, and it really isn't that big of a deal, is that I wish the kit came with more of the wire clips the hold it to the trailer frame. I wasn't planning on using them but they were much easier to use than my self drilling wire clips I had purchased. No big deal though, Amazon has an add-on pack for less than 3 bucks that I'll be ordering and installing. Overall good product for the price!
↭ 🍁 ↭
Its a light kit with some shortcomings.
by John S. (3 out of 5 stars)
July 18, 2018

I needed to completely rewire my trailer and put on all new lights so I got this kit. The lights are ok but not as bright as I expected. There are not nearly enough wiring clips to attach the wire to the trailer. I ended up buying extra wiring clips and a better quality ground connector. I basically threw all the included connectors away and bought better ones. I mean it comes with wire nuts like you would use in your house. I used crimp on connectors and then used some heat shrink tubing to seal each connection. The white ground wire from the harness is a joke. It wasn't long enough to reach my trailer. I had to splice a piece of wire to make the ground reach. This could be a decent kit if they spent a couple bucks extra and put some brighter LED's and put some quality connection accessories in there. I am going to update this review in a few months to see how it holds up.
↭ 🍁 ↭
This Seller will do everything to make your purchase correct!
by Craig E (5 out of 5 stars)
July 23, 2019

The first set of lights received were faulty on arrival, and the box had no instructions. I contacted the seller and they sent me electronic instructions, then sent me another set of lights, which I received within 2 days of explaining my issue. The seller is fast to respond an eager to make sure the sale goes smooth and that the customer is satisfied.. The second set of lights work as they should. It takes a little bit playing around to get the grounds to work good and the lights to function from what I experienced.

The lights are a great value. The instructions are a bit rough and I think should be improved so a rookie like me can understand from the get go. I spent quite a bit of time on a process that I thought would of been very easy.

The wire connectors that come with it I did not use as the twist wire connectors are good for a home style use, but not too sure about outdoor use. The only other thing is the gauge wire used in this kit is a bit thinner than your more expensive light kits.

The seller is here to make sure that you are satisfied with their product. One of my best experiences here on Amazon.
↭ 🍁 ↭
Greaat customer service
by Bill W (5 out of 5 stars)
December 7, 2017

This is a great product, lights are very bright. Also, a couple months after installing them, I broke one of the housings. I contacted CZC Auto to see if I could purchase a single replacement housing. They do not sell single housings, but they are going to send me a replacement free of charge. Can't beat that for service. Definitely recommend this company.
↭ 🍁 ↭
Can't make it work...UPDATE their PRODUCT is GOOD.
by W. Martin (5 out of 5 stars)
October 11, 2018

Well...I may have hoped too soon. Kit looked great. I've had it 2 months...just got time to install it. The instructions are bad. I have electrical knowledge but still didn't know to ground the white wire. When I did that I now have side lights. BUT no tail lights. I took VM and have 12dc at the rear light but NO LIGHT on either side. Brown to brown, yellow to yellow, green to green and all white to ground. So LEDs must be shot. So I go to look for CUSTOMER SUPPORT that everyone is praising. PLEASE tell me where it is? No 800# No email. No nothing. Maybe it's because the 30 day timeframe passed. Not sure. Anyway out there in the internet land if anyone can give me CONTACT info for CZC Auto or mfg of these lights I'd appreciate any help. Oh yeah...somewhere someone said something about polarity of LED being reversed. 12v has to go right? I would suspect the color codes handled that but I'm not going to experiment until I can find the seller. Anyone help? If I can get it working I'll gladly change my recommendation. But for now I spent $28 or so for nothing.
10-14-2018. UPDATE: Ok their product works AS ADVERTISED. I was very concerned and had to troubleshoot but found a BAD GROUND on the trailer...in fact more than one. I tried to use an EXISTING bolted ground in two places and lost voltage thru the end. It was intermittent and once I got a good ground all WORKS FINE. THIS IS A GOOD PRODUCT SO FAR so I have revised my review to positive. I can't blame them for a bad ground.

But the moral of the story is if you can't troubleshoot these kits you better know someone that can.

Customers Who Bought This Item Also Bought

*If this is not the "CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer RV Marine (Traile" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Nov 15, 2024 05:03 +08.