6pcs E-Simpo 4P Gx24q to E26/E27 Lamp Base Adapter,G24q to Medium Edison Socket Converter 4P Conduct

Product Description

[Need Bypass Ballast to Avoid Flicker Smoke Burnt] 6pcs E-Simpo 4P Gx24q to E26/E27 Lamp Base Adapter,G24q to Medium Edison Socket Conve
- Short Version 15.5mm, 4P Conductive
- Gx24q to E26 Lamp base adapter:
- Suitable for G24Q-1,G24Q-2,G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3 Lamps socket: LED,Halogen, CFL Light Base Converter
Works for 4-Pin CFL with

G24q-1: 10w 13w Quad Tube
GX24q-1: 10w 13w Triple Tube
G24q-2: 18w Quad Tube
GX24q-2: 18w Triple Tube
G24q-3: 26W 32w Quad Tube
GX24q-3: 26w 32w Triple Tube
- Voltage Workable: 85-265V AC
- Material: anti-burning PBT, Copper Contact

Note:
1. Please distinguish the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket. If your socket is 2P, pls choose G24d-E27: https://www.amazon.com/dp/B017T1UJEE
2. No Ballast is Required. It is 100% that PL-C downlight fixture has ballast inside. Dismantle ballast before install the LED light, otherwise the ballast will make resonance high voltage which destroy the light, reviews like burnt, smell, hot, flicking are all results that not bypass the ballast correctly.
3. Even you are replacing with E26/E27 CFL, you need remove the ballast also. Otherwise, the CFL E26/e27 Lamp will not work on.

2. How to bypass the ballast?
1.Off the Power.
2. Find the Ballast. Usually it is embedded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box,find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side,100-120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4.Then you can connect the two red wires to the black wire.
5.Next, connect the two blue wires to the white wire. now ballast is bypassed

Features

• This is 4P Short 15.5mm GX24Q Base, NOT FOR 2P;NOT FOR DIY!!! NEED REWIRING/BYPASS/ REMOVE the ballast,the Ballast has a black and white wire on the input side, two red and two blue output side. To bypass this ballast,cut all the Input and output wires,and connect 2 Red to Black,2 Blue to White wire.
• THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
• All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
• There are LED bulbs with Driver compatible with the ballast,which you may find work without bypass ballast. BUT no LED Driver can be compatible with all ballast.Ballast is there consuming power,cause high temperature which will damage LED Bulb, So the Professional doing is bypass it. All pin-based CFL is ballast-lamp separated, E26/E27 bulbs are self-ballast.

Customers Who Bought This Item Also Bought

*If this is not the "6pcs E-Simpo 4P Gx24q to E26/E27 Lamp Base Adapter,G24q to Medium Edison Socket Converter 4P Conduct" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jan 6, 2025 18:42 +08.