TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 265 pounds Eac

Product Description

Mount anything!
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8 to 3-5/8 thick including gypsum board, drywall, and concrete block, includes 1/4-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2 drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Features

• HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor)
• REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick
• Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More.
• SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included)
• Package contains 12 anchors and 12 bolts (Bolts are 2.5 inches) - Packaging may Vary

Customers Who Bought This Item Also Bought

• WingIts MASTER Wall Anchor, 10-32 x 3-1/2, PK6, Model:RC-MAWSD35-6
• TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, for 3/16"-24 UNC Fastener Size (1 Pack of 10)
• Simpson Strong-Tie FT18250C10 3/16"-24 FlipToggle Anchor with 2-1/2" Screw Bolt (10/Box)
• CH Hanson 03040 Magnetic Stud Finder
• TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 5)
• Simpson Strong-Tie FT25250C10 1/4" FlipToggle Anchor with 2-1/2" Bolt, 10ct
• Drywall Anchor kit - Hollow Wall Anchors with Screws ，self-Drilling Hollow Wall Anchor, for Drywall，Nylon - Plastic - Buildex，all-60 pcs (Combination 1)
• Swpeet Assorted 24 Pcs Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch, 3/16Inch, 1/4Inch
• Self Drilling Drywall Plastic Anchors with Screws Kit
• Rustark 24-Pcs 1/4'' 1/8'' 3/16'' Zinc Plated Steel Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall

*If this is not the "TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 265 pounds Eac" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Dec 27, 2024 11:45 +08.