Features
- it is for learn engineering drawing which is major subject for Mechanical branch. It almost cover topics of engineering drawing chapter wise which are given below
- 1. Representative factor
- 2. Plain scales
- 3. Diagonal scales
- 4. construction of ellipse
- 5. construction of parabola
- 6. cycloid
- 7. epicycloid
- 8. hypocycloid
- 9. Involutes
- 10. Archimedean
- 11. logarithmic spirals
- 12. Types of projection
- 13. Orthographic Projections
- 14. First and Third Angle Projections
- 15. Line parallel to a plane
- 16. Line inclined to a plane
- 17. Projection of a line parallel to both HP and VP
- 18. Line perpendicular to HP & parallel to VP
- 19. Line parallel to VP and inclined to HP
- 20. Line inclined to HP and VP
- 21. Rotate the line AB to make it parallel to VP.
- 22. Projections of planes
- 23. Plane surface parallel to one plane and perpendicular to the other two
- 24. Plane parallel to HP and perpendicular to both VP and PP
- 25. Plane parallel to PP and perpendicular to both HP and VP
- 26. Plane surface perpendicular to one plane and inclined to the other two
- 27. Projection of Solids
- 28. Sections of Solids
- 29. Visualization of Section Views
- 30. CUTTING PLANE LINES
- 31. Placement of Cutting Plane Lines
- 32. Full Section View
- 33. Broken-Out Sections
- 34. Parallel Line Development
- 35. Radial Line Development
- 36. Isometric Projection
- 37. Foreshortening
- 38. Isometric Scale
- 39. Alternative Isometric Scale
*If this is not the "
Engineering drawing" product you were looking for, you can check the other results by
clicking this link.
Details were last updated on Nov 18, 2024 14:39 +08.