Adafruit 2821 Feather Huzzah with ESP8266 Wi-Fi

Product Description

At the feather huzzah's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This controller contains a tensile chip core as well as a full WiFi stack. You can program the controller using the arduino ide for an easy-to-run Internet of things core. We wired up a high-quality silabs Cp2104 usb-serial chip that an upload Code at a blistering 921, 600 Baud for fast development time. It also has auto-reset so no fiddling with pins and reset buttons. The Cp2104 has better driver support than the CH340 and can do very high speeds without stability issues. To make it easy to use for portable projects, we added a connector for any of our 3.7V lithium polymer batteries and built in battery charging. You don't need a battery, for it will run just fine straight from the Micro USB connector. But If you do have a battery, you can take it on the go, and plug in the USB to recharge. The feather will automatically switch over to USB power when it's available.

Features

• Measures 2.0" x 0.9" x 0.28" without headers soldered in
• 4Mb of flash and built in wifi 802.11 b/g/n
• Reset button
• Pin #0 red led for general purpose blinking. Pin #2 blue led for bootloading debug & general purpose blinking
• Power/enable pin and 4 mounting holes

Customers Who Bought This Item Also Bought

*If this is not the "Adafruit 2821 Feather Huzzah with ESP8266 Wi-Fi" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Nov 6, 2024 07:08 +08.