Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)

Product Description

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 500mA or less. Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less - 500mA max in this case which is how much you can get from a USB port.

Features

• This battery is for general use. Please make sure this battery will fit your application by measuring against the dimensions below

Customers Who Bought This Item Also Bought

*If this is not the "Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Mar 1, 2025 21:49 +08.