1 Mil Kapton Tape (Polyimide) - 1/2" X 36 Yds

Product Description

1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).

Technical Data Sheet:

Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards

Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

Kapton is a registered trademark of DuPont

Features

• Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. RoHS approved and Halogen Free.
• High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant, but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
• No Residue after Peeling Off: Polyimide Tape by Tapes Master is an ideal choice for sublimation processes, thanks to its exceptional heat resistance and silicone adhesive formulation that ensures residue-free removal. Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity
• Protection, Insolation and Bonding: Protection of gold fingers: of printed circuit boards during wave solder or solder dip process. Insulation and Bonding for electrical switches, motor, lithium battery under Grade H
• Surface for 3D printers: Kapton and ABS adhere to each other very well, therefore is the recommended use of Kapton as a bed surface for 3D printers

Customers Who Bought This Item Also Bought

*If this is not the "1 Mil Kapton Tape (Polyimide) - 1/2" X 36 Yds" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jan 13, 2025 10:15 +08.