|
Product Description
Fit: 2011-2016 Ford F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines.Fitment:
FORD F-250 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017
FORD F-350 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2014-2017
FORD F-350 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017
FORD F-450 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017
FORD F-450 Super Duty Pickup - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017
FORD F-550 Super Duty Chassis - V8 406 6.7L D.I. Turbo Diesel (VIN T) 2011-2017
Make sure you unscrew the cap on the filter on the frame under truck one complete turn, then bleed the fuel out. There is like a check valve that does not engage until you do that. When you are all done with both filters,you must cycle the key to the on position 6 times waiting approx 30 secs each time before trying to start truck. You can listen to the fuel pump complete its cycle each time.
Changing frame rail filter:
Remove sensor harness, and losses filter housing with a 1 1/4" socket or 32mm or use a strap wrench. You should use a strap wrench so you don't shear the plastic housing. Turn 3 TIMES then losses yellow drain valve and drain into suitable container. Remember to lube new o-ring and re install everything.
Chasing engine filter:
Remove the fuel line keepers on both lines and by pushing down the yellow tabs and the keeper will go down out of the way, the other fuel line will come off by squeezing both white tabs inward then remove. Loosen the 7mm nut and turn and lift the fuel filter and re install in reverse order.
Prime filters by turning the key a few times before starting.
Features
- Package:Two filters: one engine mounted filter and the frame mounted filter, and one gasket/o-ring for the frame mounted filter.
- Fit: 2011-2016 F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines.
- Interchanged part number:FD-4615,BC34-9N184-BA,BC3Z-9N184-B,L4615F,33615,FF1223,K10826,BF9895.
- Be careful when removing the lower filter housing the first time. Use both a box end wrench on the nut and a strap wrench on the body the first time. Then grease the O-ring and you will be ok after that.
- The micron of this filter is 5.Every 20-22k miles,these need to be changed.
Customers Who Bought This Item Also Bought
- PG Air Filter PA6109 | Fits 2011-16 Ford F-250 Super Duty, 2011-16 F-350 Super Duty
- K&N HP-4005 Performance Wrench-Off Oil Filter
- ECOGARD XA6109 Premium Engine Air Filter Fits Ford F-250 Super Duty 6.7L DIESEL 2011-2016, F-350 Super Duty 6.7L DIESEL 2011-2016, F-450 Super Duty 6.7L DIESEL 2011-2016
- Power Stop Z36-1680, Z36 Truck & Tow Carbon-Fiber Ceramic Front Brake Pads
- Royal Purple 40-2051 Extended Life Premium Oil Filter
- Motorcraft FL2051S OIL FILTER
- Motorcraft FA-1902 Engine Air Filter
- FA-1902 Premium High Capacity Engine Air Filter For 11-16 Ford Powerstroke 6.7L Diesel Replace OE Part # BC3Z-9601-A
- Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil (1-Gallon, Case of 3)
- Motorcraft FD-4615 Fuel Filter
*If this is not the "FD-4615 5 Micron Fuel Water Separator Filter for HD Ford Truck/Pickup 2011-2016 F-250, F-350, F-450," product you were looking for, you can check the other results by clicking this link. Details were last updated on Oct 26, 2024 06:16 +08.